F-84
Two-circuit Limit Switch
WL
Note: 1.
For all models WL
@
indicates a standard model and WL01
@
indicates a microload model.
2.
Unless otherwise indicated, a tolerance of
±
0.4 mm applies to all dimensions.
Note: 1.
With WLHAL4, WL01HAL4, WLHAL5, and WL01HAL5, the
actuator’s tare is large, so depending on the installation di-
rection, they may not be properly reset. Always install so
that the actuator is facing downwards.
2.
The operating characteristics of WLHAL4, and WL01HAL4
are measured at the rod length of 380 mm.
Side-installation Models
90
°
operation on one side is possible by simply changing the direction of the cam.
Note: 1.
For all models WL
@
indicates a standard model and WL01
@
indicates a microload model.
2.
With the side-installation models, 90
°
operation on one side is possible by simply changing the direction of the cam.
3.
Unless otherwise indicated, a tolerance of
±
0.4 mm applies to all dimensions.
Operating characteristics
WLHAL4
WL01HAL4
(See note 2.)
WLHAL5
WL01HAL5
Operating force: OF max.
0.98 N
0.90 N
Release force: RF min.
0.15 N
0.09 N
Pretravel: PT
15
±
5
°
15
±
5
°
Overtravel: OT min.
55
°
55
°
Movement differential: MD
max.
12
°
12
°
Adjustable Rod Lever
Rod Spring Lever
Note:
Stainless steel rod
Note:
Piano wire
42 max.
3.2 dia. (see note)
2.3 dia. (see note)
42 max.
WLHAL4
WL01HAL4
WLHAL5
WL01HAL5
Adjustable range:
350 to 380
M5 (length:
16) Allen-
head bolt
0
Four,
5.2
+0.2
dia. holes
JIS B0202 G1/2
Effective thread:
4 threads min.
Four, M6
Depth: 15 min.
M5 (length: 16)
Allen-head bolt
0
Four,
5.2
+0.2
dia. holes
JIS B0202 G1/2
Effective thread:
4 threads min.
Four, M6
Depth: 15 min.
Three, M4
(length: 13)
Three, M4
(length: 13)
Three, M4
(length: 13)
Roller Lever
Adjustable Roller Lever
Note:
Stainless sintered roller
Note:
Stainless sintered roller
17.5 dia. (length: 7) (see note)
Four, M3
60 max.
42 max.
42 max.
Four, M3
17.5 dia. (length: 7) (see note)
67 max.
Two, 5.2
+0.2
dia.
0
WLCA2-2N
WL01CA2-2N
WLCA12-2N
WL01CA12-2N
M5 (length:
12) Allen-
head bolt
0
Four, 5.2
+0.2
dia. holes
0
Two, 5.2
+0.2
dia.
JIS B0202 G1/2
Effective thread:
4 threads min.
Four, M6
Depth: 15 min.
Adjustable range:
25 to 89
Two, M5
(length: 18)
M5 (length:
16) Allen-
head bolt
JIS B0202 G1/2
Effective thread:
4 threads min.
Four, M6
Depth: 15 min.
38R
Two, M5
(length: 18)
Three, M4
(length: 13)