52
Setting Editing Screens
Section 4-2
Menu items and functions will be as follows.
4-2-2
Editing Settings
All settings can be set by selecting items from the drop-down lists on the Set-
ting Editing Screens or by directly entering item list numbers. Use one of the
following procedures to set individual setting types.
To Enter Settings
Selecting Items From
Drop-Down Lists
1,2,3...
1.
On the Setting Editing Screen, select the setting to be made, and either
click the drop-down list arrow, or press the
Space
Bar
.
Example: The following screen will be displayed when selecting from the
drop-down list on the Pulse Rate Screen
2.
Select an item from the expanded drop-down list either by clicking on it di-
rectly, or by using the Up or Down Keys or entering its list number (
0
,
1
,
2
etc.).
3.
Press the
Enter
Key to collapse the list and set the settings.
Entering Settings Using
List Numbers
1,2,3...
1.
In the Setting Editing Screen, enter the desired settings directly.
2.
Press the
Enter
Key, or use the Up or Down Keys, to set the setting.
Note
1.
Settings can be displayed in either hexadecimal or decimal format. (Refer
to
4-2-3 To Switch Settings Display Formats
.)
2.
When the Setting Editing Screen is active, the left-hand side of its status
bar will display the possible range for entries.
Press the
Backspace
Key before setting an entry to alter it.
Note
If entering settings directly, decimal values must be entered starting with the
leading zero (i.e., 0
.
@@
)
,
not with the decimal point (i.e.,
.
@@
).
To Move the Cursor
Move the cursor in individual Setting Editing Screens either by using the Cur-
sor Keys or by clicking in the screen directly.
Menu item
Function
Restore
Restores minimized screens to the project window.
Move
Moves screens.
Size
Sizes screens.
Minimize
Minimizes screens.
Maximize
Maximizes screens.
Close
Closes screens.
Next
Activates next screen.
Possible range for entries is displayed
