76
S
E
CT
ION 3
Se
tting
Me
asu
reme
nt Ite
m
s
Z550
Operation Manual
SECTION 3
Setting Measurement Conditions (Expert Menu)
The selections for measurement item appear.
3.
Select [Step: 3 pts].
The measurement line setting screen for bottom face
region 1 appears.
4.
Specify the start and end lines of bottom face region
1.
Left/Right key: Moves the cursor.
(Press these keys together with the SHIFT Key to move
the cursor quickly.)
ENT Key: Selects the setting.
ESC Key: Cancels the setting.
The characteristic quantity setting screen appears.
5.
Select the measurement point for bottom face
region 1.
Select which position (peak, bottom, or average) within
the specified region will be measured.
The cross cursor indicating the measurement point
moves according to the selection; therefore, select the
position while monitoring the image.
Measrmnt item
Height
Step: 2 pts
Step: 3 pts
Edge position
Width
Edge center
Peak/bottom
Angle
Average
Peak
Bottom
Peak
Bottom
operation.book Page 76 Monday, June 6, 2005 10:19 AM