©
Semiconductor Components Industries, LLC, 2013
December, 2013 − Rev. 0
1
Publication Order Number:
EVBUM2216/D
NB3N1200KMNGEVB,
NB3W1200LMNGEVB
NB3N1200K/NB3W1200L
Evaluation Board
User'sManual
Introduction
The NB3N1200KMNGEVB and the NB3W1200LMNG
EVB evaluation boards were developed with a common
PCB layout design to accommodate the NB3N1200K
(standard HCSL outputs) and the NB3W1200L (HCSL
Push-Pull outputs) devices. Each board comes fully
assembled and tested and is ready to evaluate in the lab. This
evaluation board was designed to provide a flexible and
convenient platform to quickly evaluate, characterize and
verify the operation of the NB3N1200K or NB3W1200L
devices. To minimize the board size, six differential outputs
are accessed with SMA connectors. The other six
differential outputs are loaded, terminated and can be
monitored with a high impedance probe as explained later in
the manual.
The NB3N1200K Evaluation Board schematic is the
same as the NB3W1200L schematic except the “1200L” has
some components depopulated (DNI) per the “1200L”
BOM.
•
The NB3W1200LMNGEVB does not have RP resistors
installed on its differential Push-Pull outputs.
•
The NB3W1200LMNGEVB does not have
FB_OUT/FB_OUT# resistors installed.
•
The NB3W1200LMNGEVB does not have R
REF
resistor R107 installed.
This manual should be used in conjunction with the device
datasheet which contains full technical details on the device
specifications and operation.
This evaluation board manual contains:
•
Information on the NB3N1200K/NB3W1200L
Evaluation Board
•
Assembly Instructions
•
Test and Measurement Setup Procedures
•
Board Schematic and Bill of Materials
Figure 1. NB3N1200KMNGEVB and NB3W1200LMNGEVB Evaluation Board
Top View
Bottom View
http://onsemi.com
EVAL BOARD USER’S MANUAL
