P1-P12 Program Sports Diagram
Maintenance
This product must be grounded. If the power cord is damaged, replace it with the power cord
recommended by the manufacturer.
Advice
•
When use time a week is less than 3 hours, it should be lubricated once in five months.
•
When use time a week is between 4-7 hours, it should be lubricated once in two months.
•
When use time a week is more than 7 hours, it should be lubricated once in one month.
•
When use time a week is more than 7 hours, it should be lubricated once in one month.
•
It can’t be over
-lubricated. It is not the more lubricant, the better. Remember: proper
lubricating is the important factor to increase the treadmill’s service time.
Lubricating methods
For the methods to examine whether it is needed lubricant, you only need catch up the running belt
and touch the central part of the back of the belt with hand as nearly as possibly. If the belt is with
silicon resin (a bit sense of dampness) inside, this means no lubricant is needed; if the running board
is dry and you feel no silicon resin inside, this means lubricant is needed.
A. Steps for coating the running board with lubricant: (see the picture)
B. Stop the machine, remove safety key.
C. Pick up the belt, coat the inner side of the belt with silicone oil and coat both sides of the belt with
silicone resin.
Summary of Contents for ABI17-19-098
Page 1: ...BE4540...
