STEP 6.
The pedals (7&13) are marked "L" and "R" - Left and Right.
Connect them to their appropriate crank arms. The right crank arm is on the right hand side of the cycle as you sit on it.
Note that the Right pedal should be threaded on clockwise and the Left pedal on anti-clockwise.
COMPUTER
Automatic scan (SCAN): the display will automatically display in proper sequence in this state.
Distance (DST): Accumulated length in the motion process.
Speed (SPD): Display the riding speed in the motion process.
Timer (TMR): From 0 to 99:59.
Calories (CAL): Accumulated consumption in the motion process.
Pulse (
❤
): Display the heart rate in the motion process.
TIMER
(TMR)……………………………………….from 0 to 99:59 MIN
Time
SPEED (SPD)………………………………………from 0 to 99.9 KM/H
Speed
DISTANCE (DST)……………………………….....from 0 to 999.9 KM
Distance
PULSE(
❤
)
……………………………………….....from 0 to 999.9 HR
Pulse
CALORIES
（
CAL
）
……………………………….from 0 to 9999 KCAL
Calories
BATTERY:
If there is a possibility to see an improper display on the monitor, please replace the batteries to have a good
result .This computer uses two
”AAA’ or ”UM-4” batteries.
WARNING
Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death. If you feel
faint stop exercising immediately.
13
7
