One for All 3 Zapper, User Manual & Code Book

Direct Set-Up
Setting Up Your Devices

To set up the ONE FOR ALL 3 for your TV or Video Recorder,
follow the instructions below.

To set up your TV:

Find your Television code in the 
Set-Up Code section (starting on page
11). Codes are listed by brand name. The
most popular code is listed first. 

Make

sure your Television is switched on

.

Press and release your ONE FOR ALL 3’s

TV

key, 

then press and hold down the

MAGIC key

until the red light blinks

twice (the light will blink once then
twice). 

Enter your 

four-digit TV code

using the

number keys. The red light will blink
twice. 

Now, aim the ONE FOR ALL 3 at your
Television and press 

POWER

. If your

Television switches off, your ONE FOR
ALL 3 should be ready to run your
Television.

Turn your device back on and try all the
remote’s functions to ensure they are
working properly. If the functions do not
work properly, repeat steps 1-5 using
another code listed under your brand.

Write your code in the four boxes provided in the battery
compartment and on page 10 for easy future reference.

7

ONE FOR ALL

Acura

Admiral

Adyson

Agazi

AGB

Agef

Aiko

0009

0087, 0093, 0363, 041

0217, 0216

0264

0516

0087

0216, 0009, 0037, 0

0037, 0274

0361, 0208, 0371,

1

2

4

5

3

Installation

Important notes:

- To set up your Video Recorder, follow the same instructions

above, only press the VCR key during step 2.

- Some codes are quite similar. If your device does not respond or

is not functioning properly with one of the codes, try another
code listed under your brand.

- If your Television or Video does not respond, follow steps 1

through 5 with each code listed for your brand. If none of the
codes listed for your brand operate your device, try the search
method described on page 8, even if your brand is not listed at
all.

- If you change programmes on your Television through your

Video Recorder, press VCR and not TV, before you use the
programme keys.

- Remember, to control your device after the ONE FOR ALL is set

up, you must press the device key first (TV, VCR, AUX).

- Write the codes for your devices in the boxes provided on page

10 and in the battery compartment for easy future reference.

_ _ _ _