Programming Volume Unlock
1.
On the URC-9910 remote control, press and hold
SET
until you see the display change from the
current device and time to
[CODE SET]
.
2.
Press the
▼
key five times until you see the display
change to
[VOL UNLOCK]
.
(x 5)
NOTE: If you go past
[VOL UNLOCK]
, press the
▲
key one or
more times to return to it.
3.
Press
SELECT
once to begin programming.You will
see the display change to
[ALL MODE]
.
To unlock one mode, skip to step 4. Otherwise press
SELECT
once to unlock all modes.You will see the
display change to
[UNLOCKED]
and then
[EXIT SETUP]
as the remote control automatically exits the pro-
gramming mode and returns to normal operation.
4.
(Optional) Press
▲
(or
▼
) once.You will see the
display change to
[ONE MODE]
.
or
a. Press
SELECT
once.You will see the display change
to
[SEL MODE]
.
b. Press a mode key once (e.g.,
TV
) to unlock it.
You will see the display change to
[UNLOCKED]
and return to
[SEL MODE]
.
c. If desired, repeat step 4b as needed to unlock
volume controls for other devices. Otherwise,
press
EXIT
to exit the programming mode.You
will see an
[EXIT SETUP]
message as the remote
control returns to normal operation.
SELECT
33
SELECT
