Audio Receiver Functions
Press
RCVR/AMP
once to control your audio
receiver.
Press
POWER
once to turn on or off the
selected device (e.g,
RCVR/AMP
).
Use
GUIDE
to display your audio receiver’s
program guide or setup menu.
Use
INFO
to display the audio receiver’s
program information.
Use
SELECT
to set the surround sound. Use
▲
(or
▼
) to adjust the volume higher (or lower).
Use (or ) to adjust the balance left (or
right).
Use
VOL+
(or
VOL-
) to raise (or lower) the
audio receiver’s audio volume.
Press
MUTE
once to turn the audio receiver’s
audio off or on.
Use
CH+
(or
CH-
) to select the audio receiver’s
next higher (or lower) station (if applicable).
Use
PREV
to change the radio band
(if applicable).
Use the keypad (
1
~
9
and
0
) to
select audio sources (e.g.,
1
~
10
). If
the original remote control required
pressing an Enter key to change the
audio source, also press the
ENTER
key after the source number (e.g.,
9
-
ENTER
).
Press
ENTER
once after entering the source
numbers on some audio receivers.
Use
TV/VID
to switch the audio receiver
between input and output.
continued on next page...
▲
▲
SELECT
SU
RRO
UND SOUND
61