63
Use
VOL+
(or
VOL-
) to raise (or lower) the
audio turntable’s audio volume (if applica-
ble).
Press
MUTE
once to turn the audio turntable’s
audio off or on (if applicable).
Use the keypad (
1
~
9
and
0
) to
directly select tracks. If the original
remote control required pressing an
Enter key to select a track, also press
the
ENTER
key after the track number
(e.g.,
1
-
2
-
ENTER
).
Use the transport keys to control
your audio turntable (if applicable).
After programming, press
M1
~
M3
once to
run a desired macro (see
Using Macros
on
page 34).
After programming, press
L1
~
L4
once to activate a learned function.
(See
Using Learning
on page 29.)
Use to turn on or off the key backlight.
When this feature is activated, keys will
remain backlit for 5 seconds after the last key
press. In the setup mode, backlighting
will remain on for 30 seconds.
Use
SET
for all programming sequences.
