After programming, press
M1
~
M3
once to
run a desired macro (see
Using Macros
on
page 34).
After programming, press
L1
~
L4
once to activate a learned function.
(See
Using Learning
on page 29.)
Use to turn on or off the key backlight.
When this feature is activated, keys will
remain backlit for 5 seconds after the last key
press. In the setup mode, backlighting
will remain on for 30 seconds.
Use
SET
for all programming sequences.
Satellite Receiver Functions
Press
SAT
once to control your satellite
receiver.
Press
POWER
once to turn on or off the
selected device (e.g,
SAT
).
Press
MENU
once to display your satellite
receiver’s main menu.
Use
GUIDE
to display your satellite receiver’s
program guide or setup menu.
Use
EXIT
to exit from your satellite receiver’s
guide or menu.
Use
INFO
to display the satellite receiver’s
current channel and program information.
Use the cursor keys (
▲
,
▼
,
or ) to move
the cursor in the satellite receiver’s program
guide and menu screens. Use
SELECT
to
choose options from the menu or guide.
Use
VOL+
(or
VOL-
) to raise (or lower) the
satellite receiver’s audio volume (if applicable).
Press
MUTE
once to turn the satellite receiver’s
audio off or on (if applicable).
Use
FAV
to scan favorite channels and/or all
channels.(See
Using Channel Scan
and
Program-
ming Favorite Channel Scan
on page 41.)
continued on next page...
▲
▲
SELECT
SU
RRO
UND SOUND
71
