W W W.ONEFORALL.COM
9
With your ONE FOR ALL 2 Remote it is possible to change the mode of a
device key. This is useful if you want the ONE FOR ALL 2 to operate more
than one of the same device types such as two Televisions or two Video
Recorders for example.
Example: to program a second Television on the VCR key, you need
to change the VCR key into a TV key.
1
Press and hold down the
MAGIC
key until the red light
blinks twice (the red light will blink once then twice).
2
Press
9 9 2
. The red light will blink twice.
3
Press the
TV
key (the device mode you want to duplicate).
4
Now press the
VCR
key (the device mode key you want
changed) and the red light will blink twice.
The VCR key of the ONE FOR ALL 2 is now ready to be set-up for your
Television. To enter the Set-up code for your second TV, proceed with the
setup procedure on page 6 remembering to use TV codes for the VCR key.
Resetting a Device Key
Example: to reset the VCR key back to its original mode.
1
Hold down the
MAGIC
key until the red light blinks twice (the red
light will blink once then twice).
2
Press
9 9 2
. The red light will blink twice.
3
Press the
VCR
key (the device mode you want to reset).
4
Now press the
VCR
key again to confirm and the red light will blink
twice.
Now your VCR key of the ONE FOR ALL 2 is ready to be programmed for
your Video Recorder again. To enter the Set-up code for your Video
Recorder, proceed with the setup procedure on page 6.
Changing the Mode of a Device Key
9
9
2
MAGIC
TV
VCR
OFA 2 (3 rd)Uk,D,F,E,P,I,NL ”01 20-11-2001 14:23 Pagina
