WWW.ONEFORALL.COM
13
Search Method
--> If your device does not respond to the KAMELEON 5 after you have tried
all the codes listed for your brand.
--> If your brand is not listed at all.
The Search Method allows you to scan through all the codes contained in
the memory of the KAMELEON 5.
Example: To search for your TV code:
1.
Switch ON your Television (not on standby).
2.
Press and hold the MAGIC key for about 3 seconds.
The screen will change to the setup screen.
3.
Press
SEARCH
.
4.
Press and release the
TV
key to select the device type you
like to setup.
5.
Next, press
POWER
.
6.
Point the
KAMELEON 5
at your Television. Now press
NEXT over and over, until your Television turns off
(every time you press the NEXT key the KAMELEON 5 will
send out a POWER signal from the next code contained in
the memory).
You may have to press NEXT many times
(up to 150 times) so please be patient. Remember to
keep pointing the
KAMELEON 5
at your Television
while pressing this key.
(If you skip past a code, you can
go to the previous code(s) by pressing the PREVIOUS key).
7.
When your Television switches off
, press the
ENTER
key to
store the Code
. The animated IR Indicator will
light up twice.
8.
Press
ESC
to
return to the setup screen
, or press
a
device key
if you want to perform the Search Method for
another device.
9.
Press ESC again to return to user mode (all keys are
displayed).
Turn your device (television) back on and try all the
remote’s functions to ensure they are working properly. If
you cannot control your Television properly, please contin-
ue the Search Method, you may be using the wrong Code.
-
During step 5, instead of POWER you can also press any other key displayed.
This will be the function sent for the next key presses of NEXT or PREVIOUS
in step 6. If for example; during step 5 you press “2” instead of “POWER”,
the KAMELEON 5 will send the “number 2” signal every time you press
NEXT during step 6 (make sure your TV is switched to another channel).
-
To search for your other devices, follow the same instructions above, only
press the appropriate device key during step 4.
-
If your Video’s original remote control does not have a POWER key, press
PLAY instead of POWER during step 5.
-
In the LIGHT-mode the Search Method does not work.
Setting up the
KAMELEON 5
Kameleon_5_Euro_10_TALEN:Kameleon_5_nieuw_2006_Euro 12-03-2007 16:22 Pagina 13
