14
WWW.ONEFORALL.COM
Code blink out
(To find out which code is currently programmed)
If you have set up your KAMELEON 5 via the Search Method, you can blink
back your code for future reference. Please note that the animated IR Indicator
will indicate the 4 digits by animated blinks.
Example: To blink out your television code:
1.
Press and hold down the MAGIC key
(for about 3 seconds).
The screen will change to the setup screen.
2.
Press
OTHER.
3.
Press
9 9 0
, the animated IR Indicator will light up twice.
4.
Press and release the
TV
key to select the device type you like
to check the code for.
5.
For the
first
digit of your
four-digit code
, press
1
and count
the blinks of the animated IR Indicator. If there are no blinks,
the digit is “0”.
6.
For the
second
digit, press
2
and count the animated blinks.
If there are no blinks, the digit is “0”.
7.
For the
third
digit, press
3
and count the animated blinks.
If there are no blinks, the digit is “0”.
8.
For the
fourth
digit, press
4
and count the animated blinks.
If there are no blinks, the digit is “0”.
Now you have found
your four-digit code.
9.
Press
ENTER
to return to the setup screen OR press
a device
key
if you want to perform the blink out for another device.
10.
Press and hold
ESC
(for about 3 seconds) to return to user mode
.
-
You can perform steps 5 – 8 in any order and as many times as you want. So,
if you lost count it is possible to blink back the corresponding number again
(e.g. if during step 6 you did not see exactly how many times the animated
IR Indicator blinked just press “number 2” again and count again).
-
To blink back the code for your other devices follow the instructions above,
only press the appropriate device key during step 4.
Quick code Reference
Write down the codes for your devices in the boxes below for quick and
easy reference.
■
■ ■
■ ■
■ ■
■
■
■ ■
■ ■
■ ■
■
■
■ ■
■ ■
■ ■
■
■
■ ■
■ ■
■ ■
■
■
■ ■
■ ■
■ ■
■
Kameleon_5_Euro_10_TALEN:Kameleon_5_nieuw_2006_Euro 12-03-2007 16:22 Pagina 14
