U
SER
’
S
G
UIDE
Using Macros
31
5.
To save the macro, press and hold
SETUP
until the two bottom IR
segments flash twice. The
Program Keys
appear again.
6.
Exit programming by pressing
HOME
once. The display returns to the
last-selected device menu screen
.
7.
Now, if you aim the remote control at the devices selected in step 4 and
press the programmed
Macro Key
once, the TV turns on and tunes to
channel 3. Then the Cable Box turns on and tunes to channel 071.
P
ROGRAMMING
A
M
ASTER
P
OWER
M
ACRO
IN
THE
H
OME
T
HEATER
M
ODE
A macro can be programmed onto the
POWER
key to turn on or off as many
as seven Home Theater devices.
NOTE:
This following example assumes the Home Theater system contains a
Satellite Receiver, a DVD Player, an Audio Receiver, and a TV.
2.
Press
MACRO
once.The
Macro
programming screen appears:
5.
To save the power macro, press and hold
SETUP
until the two bottom IR
segments flash twice. The
Program Keys
appear again.
6.
Exit programming by pressing
HOME
once. The display returns to the
last-selected device menu screen
.
7.
To test the power macro, first make sure all home theater devices
selected in step 4 are turned on. Aim the remote control at the devices
1.
Press and hold
SETUP
until the two bottom IR
segments flash twice. The
Program Keys
appear as
SETUP
flashes repeatedly.
3.
Press
POWER
once.The last-selected
device menu screen, including
HOME
,
appears.
4.
Enter the macro sequence. For this
example, press
CBL/SAT
once, followed
by
POWER
once. Next, press
DVD
once,
followed by
POWER
once.Then press
AUDIO
once, followed by
POWER
once.
Finally, press
TV
once, followed by
POWER
once.
OFA Kameleon wRF UG rev 3.fm Page 31 Monday, September 13, 2004 11:18 AM
