K
AMELEON
8-D
EVICE
R
EMOTE
WITH
RF
54
Troubleshooting
TROUBLESHOOTING
PROBLEM:
No display at all times.
SOLUTION:
Replace batteries with four new AA alkaline batteries.
PROBLEM:
The bottom two IR indicator segments are flashing.
SOLUTION:
Replace batteries with four new AA alkaline batteries.
PROBLEM:
No display when programming.
SOLUTION:
Display has turned off due to inactivity. Start programming
again and do not pause while performing instructions.
PROBLEM:
During programming, the two bottom IR segments display
a long flash.
SOLUTION:
An invalid entry has occurred. Check the keys to be pressed
and start program again.
PROBLEM:
How do I stop programming?
SOLUTION:
Press
HOME
once to return to the
Program Keys
screen.
Press
HOME
once more to exit completely.
PROBLEM:
The unit does not control home entertainment devices or
commands are not working properly.
SOLUTION:
Try all listed codes for the device brands being set up.Make
sure they can be operated with an infrared remote control.
PROBLEM: Tried
Searching For Your Code
method and still could not
find a working code.
SOLUTION:
Perform
Restoring Factory Default Settings
on page 40. Then
repeat
Searching For Your Code
on page 19.
PROBLEM:
Cannot program a macro onto
M1 – M4
or
POWER
keys.
SOLUTION:
Make sure the total number of key presses being
programmed is less than 15.
PROBLEM:
Power macro does not execute.
SOLUTION:
First, press the
Home Theater
key once, then press
POWER
once.
OFA Kameleon wRF UG rev 3.fm Page 54 Monday, September 13, 2004 11:18 AM
