The ONE FOR ALL Sleeptimer
Your ONE FOR ALL remote comes with an
internal Sleeptimer function for those devices
which did not come standard with this function.
To use the ONE FOR ALL Sleeptimer:
Making your ONE FOR ALL ready for
Sleeptimer:
Press the TV key.
Then,
press and hold
MAGIC
until the red light
blinks twice. Press
970
. The
red light will blink twice
again. It is only necessary to
perform steps 1 and 2 once.
Now to set the timer,
continue with the steps
below.
Setting the ONE FOR ALL Sleeptimer:
It is possible to set the timer for 15, 30, 45 or 60
minutes. To do this, first make sure your TV is
switched on. Then,
Press and release
MAGIC
then
POWER
. The red
light will blink once which
indicates the timer is set for 15
minutes. To increase the timer,
simply press
POWER
again (this
must be done within 5
seconds.). The light will blink
twice indicating the timer is set
for 30 minutes (2x 15). You can
press POWER a maximum of
four times which will set the
timer to 60 minutes.
■ ■ ■ ■
■ ■ ■ ■
17
TV
2
1
(:15)
9 7 0
