■ ■ ■ ■
■ ■ ■ ■
18
Once you have set the timer to
the desired time, set your ONE
FOR ALL remote down, pointing
it at your device. When the
programmed amount of time has
elapsed, the ONE FOR ALL will
send the command for Power,
hence turning off your device.
(:30)
(:45)
(:60)
Notes:
-The red light on the ONE FOR ALL will blink
every 15 seconds indicating that the remote is
in Sleeptimer mode.
-To deactivate the Sleeptimer, simply press any
key on the ONE FOR ALL remote.
-It is only necessary to follow steps 1 and 2
above one time. For subsequent use of the
Sleeptimer, simply begin with “Setting the
Sleeptimer”.
-Remember, when using the ONE FOR ALL
Sleeptimer, you must set the remote so it is
pointing to your device.