17
English
7.
Press and hold the
SETUP
key to save your settings. The
blue ring flashes twice.
The key(s) on the SmartRemote you pressed in step 5 will
NOWEXECUTETHEFUNCTIONS YOULEARNEDFROMYOURORIGINAL
remote.
4ODELETEALEARNEDFUNCTIONANDRESTOREAKEYS
ORIGINALFUNCTION
1.
Press and hold the
SETUP
key until the blue ring flashes
twice.
2.
Press
9 7 6
. The blue ring flashes twice.
3.
Use the device select keys to highlight the device mode
where the learned function is stored.
4.
Find the key with the learned function. Press it twice to
restore its original function.
-ODE2EASSIGNMENT
If you need to control a second TV, VCR, DVD player, or other
device, you can reassign one of the One For All SmartControl
remote’s device modes to control that kind of device.
&OREXAMPLEIFYOUWANTTOCONTROLASECOND46CHOOSEA
DEVICEMODEYOURENOTALREADYUSINGLIKEDVRAUXIFYOU
don’t have a separate DVR). Then follow the instructions
here to use that device mode to control your second TV.
4OREASSIGNADEVICEMODE
1.
Press and hold the
SETUP
key until the blue ring flashes
twice.
2.
Press
9 9 2
. The blue ring flashes twice.
3.
Use the device select keys to highlight the kind of device
YOUWANTTOUSEFORTHISDEVICEMODE&OREXAMPLEIFYOU
want to use this device mode for a second TV, highlight
TV
.
4.
Press
the
SETUP
key.
5.
Use the device select keys to highlight the device mode
YOUWANTTOCHANGE&OREXAMPLEIFYOUWANTTOUSETHE
DVRAUXMODEFORASECOND46HIGHLIGHT
DVRAUX
.
6.
Press
the
SETUP
key. The blue ring flashes twice.
This device mode is ready to be used for the new device type.
Now follow “One For All SimpleSet”, “Direct Code Setup” or
the“ Code Search” to program your the remote to operate
the device.
4ORESETADEVICEMODETOITSORIGINALDEVICETYPE
1.
Press and hold the
SETUP
key until the blue ring flashes
twice.
2.
Press
9 9 2
.
3.
Use the device select keys to highlight the device mode
YOUWANTTORESETTOITSORIGINALDEVICETYPE&OREXAMPLE
TORESETTHEDVRAUXMODETOCONTROLA$62HIGHLIGHT
DVRAUX
.
4.
Press
the
SETUP
key twice. The blue ring flashes twice.
This device mode is ready to be used for its original device
type. Now follow “One For All SimpleSet”, “Direct Code
Setup” or the“ Code Search” to program your the remote to
operate the device.