O
WNER
’
S
M
ANUAL
Using Macros 11
5.
Repeat step 4 three more times for
remaining digits. Use
2
for the second
digit,
3
for the third digit, and
4
for the
fourth digit.
6.
To check for codes of other devices,
repeat steps 1 through 5, but substitute
the appropriate device key for each
device you are checking.
USING MACROS
With programming, the M1 and POWER
keys on your OFA Kameleon™ 6-Device
Hybrid Remote (URC-6690) can be setup to
perform repetitive, time-consuming
operations for easy, convenient access
through the press of a single key. Macro
keys are ideal for home theater operations,
setting a favorite channel, guide steps, or
other multiple functions you would like to
control with one key press. Moreover, each
macro key can hold up to 15 key presses
total.
NOTE:
Programming a new macro over an
existing one will erase the original macro.
P
ROGRAMMING
A F
AVORITE
C
HANNEL
With so many channels available through
your cable or satellite system provider, you
can program a macro that directly selects a
favorite channel with one key press. For
example, let’s assume your favorite cable
programs are on channel 52. Use the
following instructions to program a macro
key for direct access of this channel:
NOTE:
This example assumes the TV is
tuned to the correct Input to view your cable
box.
1.
Press and hold
SET
until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
2.
Enter
9 9 5
. The Inner IR segments
will blink twice.
3.
Select an open macro key (e.g.,
M1
)
and press it once.
4.
Press
CBL
once.
5.
Enter the channel number,
5 2
.
NOTE:
If you have access to over 100
channels, enter
0 5 2
. Also, if the original
remote control required pressing
Enter
to
change the channel, also press
Enter
after
the channel number (e.g.,
0 5 2 Enter
).
NOTE:
You can program up to 15 keypresses
on each macro key.
6.
Press and hold
SET
until the Inner IR
segments blinks twice, then release
SET
.
Now when you press
M1
, you will instantly
see cable channel 52 on your TV set.
P
ROGRAMMING
A M
ASTER
P
OWER
M
ACRO
In its default state, the
POWER
key on the
OFA Kameleon™ 6-Device Hybrid Remote
(URC-6690) will individually power your
home entertainment devices on or off.
However, you can also program a Master
Power Macro onto the
POWER
key that will
sequentially turn on or off all the devices
with a single key press.
To program the Master Power Macro:
1.
Press and hold
SET
until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
2.
Enter
9 9 5
. The Inner IR Animation
will blink twice.
3.
Press the
POWER
key once.
4.
For the first device you want in the
power-on sequence, press its device
key (e.g.,
TV
) once.
OFA Kam 6 Hybrid Owners Manual.fm Page 11 Wednesday, March 30, 2005 3:09 PM
