O
WNER
’
S
M
ANUAL
Programming Favorite Channel Scan 13
3.
To stop scanning channels at any time,
press any key once.
PROGRAMMING FAVORITE
CHANNEL SCAN
In the
TV
,
VCR/PVR
,
DVD
and
CBL/SAT
modes, you can store a list of up to 10
favorite channels, in any order, that will be
immediately scanned when
FAV
is pressed
(see Using Channel Scan).
NOTE:
Only channels of one mode can be
stored for Favorite Channel Scan.
1.
On the remote control, press
TV
,
VCR/PVR
,
DVD
or
CBL/SAT
once.
2.
Press and hold
SET
until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
3.
Enter
9 9 6
. The Inner IR Animation
will blink twice.
4.
Use the keypad to enter a favorite
channel number (e.g.,
0 3 1
). Then
press
SET
once.
NOTE:
If the original remote control required
pressing an
Enter
key to change the channel,
also press the
Enter
key after the channel
number (e.g.,
0 3 1 Enter
).
5.
If desired, repeat step 4 (in this
section) for each favorite channel to be
stored, up to a total of 10 channels.
NOTE:
If you try entering more than 10
channels, the remote control will
automatically exit programming.
6.
To exit programming, press and hold
SET
for 3 seconds. The Inner IR
Animation will blink twice.
USING LEARNING
The OFA Kameleon™ 6-Device Hybrid
Remote (URC-6690) includes a Learning
feature so you can add functions that are
unique to your home entertainment devices
(e.g., DVD EJECT). However, there are some
considerations.
L
EARNING
P
RECAUTIONS
•
Your original remote controls must be
in working order for learning to work
properly.
•
Learned keys are mode specific, so
each one can store a unique function
for each mode.
•
Learned keys can be used in macros
(see Using Macros on page 11).
•
Do not use the following keys for
learning: Device Keys,
SETUP
,
FAV
, or
Record
(•) Key.
•
Learning capacity is approximately 50
to 70 keys, depending on the code
being learned.
•
If both learned and keymoved
functions are assigned to the same key,
the last programmed function is
stored.
•
A learned function cannot be used as a
source for Keymover (see Using
Keymover on page 15).
•
Certain device codes are not learnable
including multi-frequency types, some
high frequency ones, and other
unusual formats.
•
For optimum learning, avoid high
levels of ambient light such as natural
sunlight or energy-efficient fluorescent
lights.
OFA Kam 6 Hybrid Owners Manual.fm Page 13 Wednesday, March 30, 2005 3:09 PM
