O
WNER
’
S
M
ANUAL
Using Keymover 15
assign the unused AUX key to operate the
second DVD as follows:
1.
On the remote control, press and hold
SET
until the two Inner IR segments
flash twice. The current mode key will
blink on and off during programming.
2.
Enter
9 9 2
. The Inner IR Segments
will blink twice.
3.
Press
DVD
once, then press
AUX
once.
The
AUX
key is now ready to be
programmed for your second DVD. (See
Programming Device Control on page 8.)
To re-assign other device keys to the
AUX
key, repeat steps 1 through 4 above by
substituting the sequence from the chart:
You can also re-assign another unused
device key by substituting an open key for
the
AUX
key in the above chart and
performing the sequence. For example, to
re-assign an unused CBL/SAT key as a 2nd
TV key, perform
SET
Ö
9
Ö
9
Ö
2
Ö
TV
Ö
CBL/SAT
. When a re-assignment is done, the
Inner IR Segments will blink twice to
confirm your choice. At that time, you will
need to program the remote control for the
new device (see Programming Device
Control on page 8).
USING KEYMOVER
OFA Kameleon™ 6-Device Hybrid Remote
(URC-6690) includes a Keymover feature
that allows you to map (or copy) keys from
one mode (i.e., source mode) to another
mode (i.e., destination mode).
NOTE:
The following keys cannot be used as
a source or destination:
TV
,
CBL/SAT
,
VCR/PVR
,
DVD
,
AUD
,
AUX
,
FAV
, and
SET
.
P
ROGRAMMING
K
EYMOVER
For example, if your VCR does not have
volume control, you can map the volume
and mute keys from the TV mode to the
VCR mode as follows:
1.
Press and hold
SET
until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
2.
Enter
9 9 4
. The Inner IR Segments
will blink twice.
3.
For the source mode, press
TV
once.
4.
For the source key, press
VOL+
once.
5.
For the destination mode, press
VCR/PVR
once.
6.
For the destination key, press
VOL +
once.
IR Segments will blink twice
indicating the keymoved sequence is
correct.
7.
Repeat steps 1 through 7 twice more,
substituting
VOL-
and
MUTE
as source
and destination keys in steps 4 and 6.
Upon completion of the above procedure,
you can now use your OFA Kameleon™ 6-
Device Hybrid Remote (URC-6690) to
control the TV’s volume and mute in the
VCR mode, as well as in the TV mode.
To Re-Assign
Device Key…
Perform Sequence…
AUX
as 2nd
TV
key:
SET
Ö
9
Ö
9
Ö
2
Ö
TV
Ö
AUX
AUX
as 2nd
VCR/ PVR
key:
SET
Ö
9
Ö
9
Ö
2
Ö
VCR/PVR
Ö
AUX
AUX
as 2nd
CBL/SAT
key:
SET
Ö
9
Ö
9
Ö
2
Ö
CBL/SAT
Ö
AUX
AUX
as 2nd
AUD
key:
SET
Ö
9
Ö
9
Ö
2
Ö
AUD
Ö
AUX
OFA Kam 6 Hybrid Owners Manual.fm Page 15 Wednesday, March 30, 2005 3:09 PM
