10
WWW.ONEFORALL.COM
Once you have Set-Up your ONE FOR ALL 4, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1
Press
TV once.
2
Press and
hold down
the
MAGIC key
(for approximately 3 seconds) until the
red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
3
Press
9 9 0
. The red LED underneath the TV key will blink
twice.
4
For the first digit
of your four-digit
code, press
1
and
count all the red blinks.
5
For the second digit, press
2
and count all the red blinks.
6
For the third digit, press
3
and count all the red blinks.
7
For the fourth digit, press
4
and count all the red blinks.
Now you have your four-digit code.
-
If there are no blinks, the digit is "0".
-
If you are not sure how many times it blinked, simply press
the corresponding digit again to repeat the blink-back.
Code Blink out
(To find out which code is currently programmed)
Quick Code Reference
Device Type
Code
1.__________________________________
2.__________________________________
3.__________________________________
4.__________________________________
■
■ ■
■ ■
■ ■
■
■
■ ■
■ ■
■ ■
■
■
■ ■
■ ■
■ ■
■
■
■ ■
■ ■
■ ■
■
x2
