W W W.ONEFORALL.COM
4
Installing The Batteries
The ZAPPER needs 2 new “AAA/LRO3” alkaline batteries.
1
Remove the battery cover from the back of the ZAPPER by pressing
down on the tab.
2
Match the batteries to the +/- marks inside the battery case, then
insert the batteries.
3
Press the battery cover back into place.
See picture of the ZAPPER 3 remote on page 3.
1
LED
The LED (Light Emitting Diode) will flash red when a key is pressed
to show the remote is working
2
Magic
The MAGIC key is used to set up your ZAPPER and to access special
features.
3
Power
The Power key turns your devices both on and off.
4
Device Keys
The TV ,VCR and SAT keys select the home entertainment device to
be controlled. Pressing the TV key allows the remote to control the
functions of your Television. After pressing VCR you can operate
your Video Cassette Recorder. After pressing SAT, you can operate
your Satellite Receiver or Cable Converter.
Important notes:
- In order to avoid having to reprogram your ZAPPER after you remove
the batteries, you will need to insert new batteries within 5 minutes.
- Also, it is best that you do not use rechargeable batteries.
- On the inside of the battery compartment door you will find a
label on which to write your set-up codes after your ZAPPER is
set up for your devices. Please write down your codes for easy,
future reference.
Features and Functions
