Direct Set-Up
To set up the ZAPPER for your Television, Video and Satellite Receiver (or
Cable Converter) follow the instructions below. To set up your Television:
1
Find your Television code in the Set-Up Code section (page
66-80). Codes are listed by brand name. The most popular
codes are listed first.
Make sure that your Television is
switched on (not in standby).
2
Press and release the
TV
key to select the device.
3
Press and hold down MAGIC
until the red light blinks
twice (it will blink once then twice).
4
Enter your 5-digit
code according to the chart below.
The red light will blink twice.
5
Now, aim the ZAPPER at your Television and press
POWER
. If your Television switches off, your ZAPPER
should be ready to operate your device.
6
Turn your device back on and try all the remote’s functi-
ons to ensure they are working properly. If the functions
do not work properly, repeat steps 1-6 using another code
listed under your brand.
7
Write the codes for your TV, VCR and SAT in the
boxes provided on page 7 and inside the battery
compartment for easy future reference.
6
W W W.ONEFORALL.COM
Setting Up The ZAPPER
ONE FOR ALL
Acura
Admiral
Adyson
Agazi
AGB
Aiko
11132
12224
1224
2 233
13
14232
21131
31121
14231
1113
2 113
22
22414
1131
4 121
31
22332
1344
4
TV
=
1
Volume -
=
2
Pro
=
3
Programme -
=
4
