The Search Method
If your device does not respond to the ONE FOR ALL 4 after you have tried
all the codes listed for your brand, try searching for your code. The Search
Method allows you to find the code for your device by scanning through all
the codes contained in the memory of the ONE FOR ALL 4. The search
method may also work if your brand is not listed at all.
Example: To search for your television code:
1
Switch your television on (not in standby) and aim your
ONE FOR ALL 4 at your device.
2
Press the
TV
key on the ONE FOR ALL 4.
3
Press and hold down
MAGIC
until the ONE FOR ALL 4 red
light blinks twice (the red light will blink once then twice).
4
Press
9 9 1
. The red light will blink twice.
5
Now slowly, alternate between
TV and POWER
, over and
over, until your television turns off. You may have to press
these keys many times (up to 200 times!), so please be
patient. Remember to keep pointing the ONE FOR ALL 4
at your television when you press these keys.
6
As soon as your television turns off, press
MAGIC
to store
the code.
The ONE FOR ALL remote should now be ready to operate your TV. Turn
your TV back on and try all the remote’s functions to ensure they are wor-
king properly. If some of the ONE FOR ALL 4’s commands are not operating
correctly, try the search method again. You may be using the wrong code.
Important notes:
- To search for the code for another device follow the instructions above
only press the appropriate device key instead of TV during steps 2 and 5.
- If the original remote control of your VCR does not have a POWER key,
press PLAY instead of POWER during step 5.
W W W.ONEFORALL.COM
7
9
9
1
TV
TV
MAGIC
MAGIC
