4
W W W.ONEFORALL.COM
See picture of ONE FOR ALL remote on page 3
1
LED
The LED (Light Emitting Diode) will flash red when a key is
pressed to show the remote is working.
2
MAGIC Key
The MAGIC key is used to set up your ONE FOR ALL and to
access special functions.
3
MENU Key
Controls the same function as it did on your original remote.
4
POWER Key
Controls the same function as it did on your original remote.
5
Number Keys
The Number keys (0-9, 10, AV(20)) provide functions just like
your original remote. If your original remote uses one/two
digit input switching (
-/--
symbol), this function can be obtained
by pressing the
-/--
key (10 key). If your original remote has a 20
key, this function can also be found under the AV key.
6
/- Keys
These keys operate just as those on your original remote.
7
MUTE Key
The MUTE key operates the same function it did on your
orginal remote control. It is also used to activate the Scan
feature (see page 9).
8
Programme (Channel) +/- Keys
These keys operate just as those on your original remote.
9
RECALL Key
The RECALL key operates the same function it did on your
original remote control. If your original remote does not have
a Recall function you can set the Recall function up with
the ONE FOR ALL RECALL on page 10.
10
Directional Keys
Allows you to navigate through the menu of your television.
11
OK
The OK key will confirm your choice in menu operation.
12
Teletext Keys
These keys operate the main teletext functions. Of course, your
television must have teletext capability.
TEXT ON:
Puts the television in the teletext mode.
TEXT OFF:
Switches the television back to regular viewing
mode. On some televisions, this may be done by pressing the
TEXT ON key several times.
EXPAND:
Shows the top half of the teletext page in
larger letters. By pressing again, you can see the
bottom half of the teletext page enlarged. To return
to regular teletext viewing, press the EXPAND key
again, or press the TEXT key, depending on your
television.
HOLD:
Stops changing pages.
The Keypad
