The Search Method
If your television does not respond to the ONE FOR ALL TV remote
after you have tried the Set-Up method on pages 6 and 7, try searching
for your SET-UP CODE. The Search Method may also work if your brand
is not listed at all.
You can find your “Search method barcode” on
page 37 in the barcode list.
To search for your television SET-UP CODE:
1
Make sure that your television is switched on (not in standby).
2
Press and
hold until the red light blinks twice
(the red
light will blink once and then twice).
3
Press and release
(POWER) (the red light will blink twice).
4
Swipe the “Search method barcode” as explained at step 5 on page 6.
5
Now aim your ONE FOR ALL at your television and slowly alternate
between
and
(POWER), over and over, until your television
switches off.
You may have to press these keys many times (up
to 200!), so please be patient.
Remember to keep pointing the
ONE FOR ALL at your television when you press the and
(POWER) keys.
6
As soon as your television switches off, press
to store
your SET-UP CODE.
7
The ONE FOR ALL TV remote should now operate your device. Turn
your television back on (press a digit key or (POWER)) and try
all the remote’s functions to ensure they are working properly. If
some commands of the ONE FOR ALL TV remote are not operating
correctly, try the search method again. You may be using the
wrong SET-UP CODE.
Blinking back your SET-UP CODE
Once you have Set-Up your ONE FOR ALL TV remote,
you can
blink back your SET-UP CODE for future reference.
1
Press and
hold until the ONE FOR ALL TV remote’s red
light blinks twice
(the red light will blink once and then twice).
2
Press
9 9 0
. The red light will blink twice.
3
For the first digit of your four-digit SET-UP CODE, press
1
and
count all the red blinks. If there are no blinks, the digit is “0”.
4
For the second digit of your four-digit SET-UP CODE, press
2
and
count all the red blinks. If there are no blinks, the digit is “0”.
5
For the third digit of your four-digit SET-UP CODE, press
3
and
count all the red blinks. If there are no blinks, the digit is “0”.
6
For the fourth digit of your four-digit SET-UP CODE, press
4
and
count all the red blinks. If there are no blinks, the digit is “0”. Now
you have your four-digit SET-UP CODE.
Write down your SET-UP CODE (TV CODE) on the inside of the
battery compartment for easy future reference.
8
W W W.ONEFORALL.COM
Important notes:
- If you have problems reading the “Search method barcode” please replace
steps 3 and 4 by entering the digits
9 9 1
instead.
TV BRAND
BARCODE NR.
SET-UP CODE
