Installing the Batteries
Your ONE FOR ALL 3 needs 2 new “AA/LR6” alkaline batteries.
1
Remove the battery cover from the back of your ONE FOR ALL 3 by
pressing down on the tab.
2
Match the batteries to the + and - marks inside the battery case,
then insert the batteries.
3
Press the battery cover back into place.
See picture of ONE FOR ALL 3 remote on page 3
1
LED
The LED (Light Emitting Diode) flashes red to show the remote is
working.
2
MAGIC Key
The MAGIC key is used to set up your ONE FOR ALL 3 and to access
special functions.
3
POWER Key
The Power key controls the same function as it did on your original
remote.
4
Device Keys
The TV, VCR and AUX keys select the home entertainment device to
be controlled. For example pressing the TV key allows the remote to
control the functions of your Television, after pressing VCR you can
operate your Video Cassette Recorder and the AUX key operates a
second television or video recorder.
5
Number Keys
The Number keys (0-9, 10, 20) provide functions just like your origin-
al remote, such as direct access programme selection. If your original
remote uses one/two digit input switching (-/-- symbol), this function
can be obtained by pressing the -/-- key, which is the same as the 10
key.
6
Programme (Channel) +/- Keys
These keys operate in the same way as the keys on your original
remote.
7
Mute
The Mute key operates the same function it did on your orginal
remote control. It is also used to activate the Scan feature (see page
9).
8
/- Keys
These keys operate in the same way as the keys on your original
remote.
The Keypad
Important notes:
- In order to avoid having to reprogram your ONE FOR ALL 3 after
you remove the batteries, you will need to insert new batteries
within 5 minutes. Also it is best that you do not use rechargable
batteries.
- On the inside of the battery compartment door you will find a
label on which to write your Set-Up codes after your ONE FOR
ALL 3 is set up for your device. Please write down your codes for
easy, future reference.
W W W.ONEFORALL.COM
4
