The Search Method
If your device does not respond to the ONE FOR ALL 3 after you have tried
all the codes listed for your brand, try searching for your code. The Search
Method allows you to find the code for your device by scanning through all
the codes contained in the memory of the ONE FOR ALL 3. The Search
Method may also work if your brand is not listed at all.
Example: To search for your TV code:
1
Switch your television on (not on standby) and aim your
ONE FOR ALL at your TV.
2
Press the
TV key
on your ONE FOR ALL 3.
3
Press and hold down MAGIC
until the ONE FOR ALL 3’s
red light blinks twice (The red light will blink once and
then twice).
4
Press
9 9 1
. The red light will blink twice.
5
Now slowly, alternate between
TV
and
POWER
, over and
over, until your television turns off.
You may have to
press these keys many times (up to 200!), so please
be patient.
Remember to keep pointing the ONE FOR
ALL 3 at your television when you press these keys.
6
As soon as your television turns off, press
MAGIC
.
The ONE FOR ALL remote should now be ready to operate your device.
Turn your device back on and try all the remote’s functions to ensure they
are working properly. If some of the ONE FOR ALL’s commands are not
operating correctly, try the search method again. You may be using the
wrong code.
Once you have Set-Up your ONE FOR ALL 3, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1
Press
TV once
.
2
Press and hold MAGIC
until the ONE FOR ALL 3’s TV key
blinks twice (The red light will blink once and then twice).
3
Press
9 9 0
. The red light will blink twice.
4
For the first digit
of your four-digit code
, press
1
and
count all the red blinks. If there are no blinks, the digit is
"0".
5
For the second digit, press
2
and count all the red blinks.
If there are no blinks, the digit is "0".
6
For the third digit, press
3
and count all the red blinks.
If there are no blinks, the digit is "0".
7
For the fourth digit, press
4
and count
all the red blinks. If there are no blinks, the digit is "0".
Now you have your four-digit code.
Make sure you write your Television code in the boxes provided in
the battery compartment and on page 8 for easy future reference.
Important notes:
- To search for the code for another device follow the instructions above
only press the appropriate device key instead of TV during steps 2 and 5.
- If the original remote control of your VCR does not have a POWER key,
press PLAY instead of POWER during step 5.
Important note:
To blink back the code for your other devices press the
appropriate device key during step 1.
W W W.ONEFORALL.COM
7
