W W W.ONEFORALL.COM
9
Colour and Brightness
Depending on the functions of your original remote control, the ONE FOR
ALL may operate the colour and brightness settings of your television.
Colour (+)
= Press and release MAGIC then hold Volume (+)
Colour (-)
= Press and release MAGIC then hold Volume (-)
Brightness (+) = Press and release MAGIC then hold Channel (+)
Brightness (-) = Press and release MAGIC then hold Channel (-)
Volume Punch-Through
You may be able to use some features of your Television and Video
Recorder at the same time. If you're watching a programme on your Video,
you can adjust the volume (a TV function) without first pressing the TV key.
The chart below lists some of the possibilities:
Last Key Pressed:
You Can Control:
VCR
TV volume up and down, mute
AUX
TV volume up and down, mute
To punch through to TV Volume while in VCR mode press
MAGIC* 9 9 3
TV key.
To cancel the ”Volume Punch Trough”
Press MAGIC* 9 9 3 ) (the red light will blink four times)
* Here you must hold down MAGIC until the red light key blinks
twice.
Auto Scan
Your ONE FOR ALL 3 comes with a special Auto Scan function which lets
you “scan” through every programme available on your device.
For example, to scan the programmes on your TV:
1
Aim the ONE FOR ALL 3 at your TV. Press the
TV
key. Press and
release
MAGIC
then press the
MUTE
key.
The ONE FOR ALL 3 will send the command to advance through all
the programmes available on your Television stopping at each
programme for about three seconds. Remember, you must aim the
ONE FOR ALL at your device the entire time you are using Auto
scan.
2
When you find a programme you would like to watch, simply press
any key
on the ONE FOR ALL key pad to stop the Auto Scan
feature.
Advanced Features
Important notes:
Auto Scan may not work with devices that did not have
pro/- keys on the original remote control.
Note:
You have 5 seconds to press the Volume or Channel keys for colour or
brightness adjustment after pressing MAGIC.
