W W W.ONEFORALL.COM
19
W W W.ONEFORALL.COM
19
Trouble-Shooting
Problem:
Your brand is not listed
in the code section?
The ONE FOR ALL does
not operate your
device(s)?
The ONE FOR ALL is not
performing commands
properly?
Problems changing
channels?
Video/DVD Recorder not
recording?
The ONE FOR ALL does
not respond after
pressing a key?
The device key does not
blink when you press
a key?
Solution:
Try the search method on page 7.
A) Try all the codes listed for
your brand.
B) Try the search method on
page 7.
You may be using the wrong
code. Try repeating the Direct
Set-Up using another code listed
under your brand or start the
search method over again to
locate the proper code.
Enter the programme number
exactly as you would on your
original remote.
As a safety feature on your ONE
FOR ALL, you must press the
Record key twice.
Make sure you are using new
batteries and are aiming the ONE
FOR ALL at your device.
Replace batteries with 2 fresh,
new “AA/LR6” alkaline batteries.
Helpful Hints
Auto Channel Scan
Your ONE FOR ALL 6 comes with a special Auto Channel Scan function
which lets you “scan” through every programme available on your device.
For example, to scan the programmes on your TV:
1
Aim the ONE FOR ALL 6 at your TV. Press the
TV
(or VCR, DVD, SAT)
key. Press and release
MAGIC
then press the
MUTE
key.
The ONE FOR ALL 6 will send the command to advance through all
the programmes available on your Television stopping at each
programme for about three seconds. Remember, you must aim the
ONE FOR ALL at your device the entire time you are using Auto
scan.
2
When you find a programme you would like to watch, simply press
any key
on the ONE FOR ALL key pad to stop the Auto Scan
feature.
Important notes:
- Auto Channel Scan may not work with devices that did not have
pro/- keys on the original remote control.
OFA 6 2004 (Uk,D,F) 16-03-2004 15:14 Pagina 19
Summary of Contents for URC-7562
Page 3: ...WWW ONEFORALL COM 3 5 11 9 8 7 3 4 6 14 12 13 10 2 1 ...
Page 57: ......
