One for All URC8820N, User Manual

6

CBL/SAT

 Code:  

   Brand Name:____________________

DVD

 Code:  

   Brand Name:____________________

PVR

 Code:  

   Brand Name:____________________

AUX

 Code:  

   Brand Name:____________________

Aux. Device Type:_______________

Programming Combo Device Control

You can set this remote to control your combo devices such as TV/
VCR, TV/DVD, Satellite/PVR/DVR, Home-Theater-In-A-Box, and many 
others with a single code. For a complete list of combo devices, 
refer to the “Device Table.” 

NOTE:

 Some combo device types have codes that you can program 

on separate device keys. For example, you can program DVD Player/ 
VCR Combo codes under the 

VCR

 or 

DVD

 mode keys. See the DVD/

VCR Combos section of the code lists; note that there are two 
sections under this device type. 

To control a TV/DVD Combo:

1.  Turn on the TV/DVD Combo and insert a DVD. 
 

NOTE:

 Please read steps 2 through 4 completely before 

proceeding. Highlight or write down the codes and device you 
wish to program before starting step 2. 

2.  On the remote control, press 

TV

. 

3.  Press and hold 

SET

 until the LED (red light) blinks twice, and 

then release 

SET

.

4.  Use the setup codes under the TV/DVD Combos heading (use 

codes listed as “Controlled by TV key”). Locate the brand name 
and then enter the first four-digit code for your device. If 
performed correctly, the LED will blink twice.

NOTE:

 If the LED did not blink twice, repeat steps 2 through 4 

and enter the same code again. 

5.  Aim the remote control at the device and press 

POWER

 once. 

It should turn off. If the device does not respond, repeat steps 
2 through 4, trying each code for your brand until you find 
one that works. If it still does not work, try “Searching for Your 
Code”.

Searching For Your Code

If your device does not respond to the remote control after trying 
all codes listed for your brand, or if your brand is not listed at all, 
try searching for your code. For example, to search for a code for 
your TV:

1.  Turn on your TV and on the remote control, press 

TV

 once.

2.  Press and hold 

SET

 until the LED (red light) blinks twice, then 

release 

SET

. 

3.  Enter 

9 9 1

. The LED will blink twice. 

4.  Select a test function from the list below or use the default test 

function (

POWER

) and skip step 4. 

NOTE: 

The keys that can be used for the test function are 

0

, 

1

, 

2

, 

3

, 

POWER

, 

VOL +

, 

Play

, 

Stop

 and 

MUTE

.