One for All URC8820N, User Manual

9

2.  Enter 

9 9 3

 and then press any mode key once (e.g., 

TV

). The 

LED will blink twice.

3.  Now, when you press 

VOL +

, 

VOL -

, or 

MUTE

, the volume of 

the selected device (e.g., TV) will be controlled regardless of the 
mode you have selected.

Unlocking Volume Control For A Single Device 
(Individual Volume Unlock) 

1.  After performing Global Volume Lock (see above), press a 

desired mode key where you want volume to be unlocked (e.g., 

AUD

) and controlled within its own mode. 

2.  Press and hold 

SET

 until the LED (red light) blinks twice, then 

release 

SET

. 

3.  Enter 

9 9 3

 and then press 

VOL -

 once. The LED will blink four 

times. 

4.  If desired, repeat steps 1 through 3 (of this section) for each 

device that you want volume to be unlocked. 

5.  Now, after you select a device that has volume unlocked (e.g., 

AUD

), pressing 

VOL +

, 

VOL -

, or 

MUTE

, will control the device’s 

volume only in its own mode. 

Unlocking All Volume Control  
(Restoring Default Setting)

NOTE:

 Performing these instructions will restore independent 

volume control for all programmed devices (e.g., TV volume control 
in 

TV

 mode, VCR volume in 

VCR

 mode, etc.). 

1.  On the remote control, press and hold 

SET

 until the LED (red 

light) blinks twice, then release 

SET

. 

2.  Enter 

9 9 3

 and then press 

VOL +

 once. The LED will blink four 

times. 

3.  Volume will again be independently controlled according to its 

default states for all programmed devices. 

Using Macros

You can program the 

M1

 and 

M2

 keys on your remote to perform 

repetitive, time-consuming operations for easy, convenient access 
through the press of a single key. 

Macro keys are ideal for home theater operations, setting a favorite 
channel, guide steps, or other multiple functions you would like to 
control with one key press. Moreover, each macro key can hold up 
to a total of 20 key presses. 

NOTE:

 Programming a new macro over an existing one will erase 

the original macro. 

Programming A Favorite Channel 

With so many channels available through your cable or satellite 
system provider, you can program a macro that directly selects a 
favorite channel with one key press. 

For example, let’s assume your favorite cable programs are on 
channel 52. Use the following instructions to program a macro key 
for direct access of this channel: 

NOTE:

 This example assumes the TV is tuned to the correct Input to 

view your cable box. 

1.  Press and hold 

SET

 until the LED (red light) blinks twice, then 

release 

SET

.