W W W.ONEFORALL.COM
9
Controlling Colour & Brightness
Depending on the functions of your original remote control, the ZAPPER
can operate the colour and brightness settings of your Television.
Scan
Your ZAPPER comes with a special Scan function which lets you “scan”
through every programme available on your TV.
To scan the programmes on your TV:
1
Aim the ZAPPER at your TV. Press and release
MAGIC
then press the
MUTE
key.
The ZAPPER will send the command to advance
through all the programmes available on your
Television stopping at each programme for about three
seconds. Remember, you must aim the ZAPPER at your
device the entire time you are using scan.
2
When you find a programme you would like to watch,
simply press
any key
to stop the Scan feature.
Advanced Operation
then hold
Press
Colour up
=
then hold
Press
Colour down
=
then hold
Press
Brightness up
=
then hold
Press
Brightness down =
Note:
You have 5 seconds to press the Volume or Channel keys for colour or
brightness adjustment after pressing MAGIC.
Important note:
Scan may not function with a television that did not have
a pro/- key on the original remote.
