20
the required position and release the lever.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to five
different heights. See figure 9.
1.
Remove the seat from your scooter. See
section 8.
“Disassembly and Assembly.”
2.
Use the ring to pull and remove the ball
detent pin from the lower seat post.
3.
Raise or lower the upper seat post to the
desired seat height.
4.
While holding the upper seat post at that
height, match up holes in the upper and
lower seat posts.
5.
Fully re-insert the ball detent pin.
6.
Replace the seat.
7 . C O M F O R T A D J U S T M E N T S
FRONT-TO-BACK SEAT ADJUSTMENT
Reposition the seat backward or forward by pulling
up the Release lever.
Tiller Adjustment Lever
Figure 8. Tiller Angle Adjustment
Seat Pedestal
Upper Seat post
Locating Holes
Ball Detent Pin
Figure 9. Seat Height Adjustment
Release Lever
Seat Lock Lever
