21
SEAT LOCK LEVER
The seat lock lever locks the seat in one of 5 positions.
1.
Pull forward the seat lock lever to unlock the seat.
2.
Rotate the seat to the desired lock position.
3.
Release the seat lock lever to lock the seat securely in place.
ARMREST WIDTH ADJUSTMENT
The width of the seat can be adjusted by
moving the armrests in and out.
1.
Loosen the thumbscrews at the back of the
seat frame.
2.
Slide the armrests in or out to the desired
width.
3.
Tighten the thumbscrews.
The armrests also pivot upward to make
getting on and off of your scooter easier.
8 . B A S I C T R O U B L E S H O O T I N G
Any electro-mechanical device occasionally requires some troubleshooting. However, most of the
problems that may arise can usually be solved with a bit of thought and common sense. Many of these
problems occur because the batteries are not fully charged or because the batteries are worn down and
can no longer hold a charge.
What if all the systems on my s
cooter seem to be “dead”?
■
Make certain that the key is fully inserted in the key switch
and rotated to the “on” position
.
Thumbscrews
Figure 11. Armrest Width Adjustment
Figure 10. Seat Adjustment and
Lock Lever
