3. Folding the rollator:
To fold the rollator first unlock the RED retaining clip by lifting it upwards as shown
below. Then lift the strap in the centre of the seat and continue to lift upwards to
fold as shown. Once folded the RED retainging clip can be re-locked to hold the
rollator in the folded postion for storage etc.
4. Installing the handles:
Holding the ‘RED’ release lever in the open position
as shown below, insert the
handles making sure the rectangular slots are facing inwards. Adjust the handles
to the required height. Re-adjust the handle height if necessary by
releasing the red lever and either lifting or pushing down the handle.
Set to the desired height and close the
‘
RED
’
release lever. The release lever
should click when locked into the closed position.
WARNING!
Never use the rollator without making sure the RED release lever is fully locked
in the closed postion.
Clip in locked
position.
Lift clip upwards
to unlock.
Lift strap upwards
to fold.
Summary of Contents for Treka 480
Page 1: ...ROLLATOR USER MANUAL...
