Page 4
For technical questions, please call 1-800-444-3353.
SKU 68354
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning
of this manual including all text
under subheadings therein before
set up or use of this product.
Time, Date and Language Setting
1. After turning on Weather Station, press and hold
the MODE key for three seconds. The Station will
beep and the setting to be changed will flash.
2. Press UP/DOWN key to adjust the year
setting. Press MODE to confirm setting.
3. The order of setting is year / month / day / language
/ hour / minute / then exit.
NOTE:
The seven
options for languages are German, English,
Italian, French, Dutch, Spanish and Danish.
4. Once the date is set, the Week will automatically be set.
5. Press and hold the UP key for three seconds to
change the Year and Day of Week display.
6. If you are in the process of setting but do
not operate the device for 8 seconds, the
display will return to normal mode.
Alarm Setting
1. Press the ALM key for three seconds. A
beep will be heard. Then press UP/DOWN
to adjust the alarm’s time setting.
2. Press ALM again to confirm the setting. The alarm bell
icon will appear/disappear when the alarm turns on/off.
Snooze
1. While the alarm is on, press the SNZ key to activate
snooze function. The snooze function will last for
five minutes and can be repeated for five times.
2. Press ALM to deactivate the snooze function.
Outdoor Temp Alarm Settings
1. Press ALERT once. The temperature
alert will turn on (or off) and the direction
arrows will appear (or disappear).
2. Press ALERT again for two seconds. The max.
indoor temp and the “up” arrow will flash. Press
CH to select the channel you need to set. When
entering the outdoor temp alarm setting, the max.
outdoor temp and the “up” arrow will flash.
3. Use the UP/DOWN keys to set the max. temperature
alert. When finished, press ALERT to confirm setting.
4. Follow the same steps to set the
minimum temperature alert setting.
5. Press ALERT again to exit.
6.
NOTE:
If you do not press ALERT or another
key for 8 seconds while in this mode, the system
will exit back to the standard time mode.
7. If you wish to readjust the max or min. temperature
alert, press the UP or DOWN key. The setting
will begin to flash, allowing for readjustment.
8. Note the following:
a. The indoor temperature range is
-14 to 158° F (-10° to 70° C).
b. The outdoor temperature range is
-40 to 158° F (-40° to 70° C).
c. For the temperature alert setting, the
lowest alarm temperature should be
1 less from the highest temperature.
d. The humidity detecting range is 20%~95%.
However, if the temperature goes below -40° F,
the display will show LL%. Should the humidity
go below 20%, the display will show LL%. If the
humidity is higher than 95%, it will show HH%.
e. When the temperature alarm beeps in
the current channel, the temperature and
alarm signs will flash. When set in another
channel, only the alarm symbol will flash.
f. When the outdoor temperature alarm
beeps, the temperature and alarm
symbols will flash simultaneously.
g. Once the alert sounds, press any key to stop
the alert. The press ALERT to turn off the alert.
The alert symbol will disappear from display.
h. If the temperature alert and alarm go off
at the same time, turn off the alarm first.
Then deactivate the temperature alert.
i. The temperature alert will beep every second
and last for five seconds. Then it will stop for
about a minute (55 seconds). It sound again
until pressing any key or until the temperature
goes up. Once the temperature goes up,
the beeping will stop automatically.
