Page 6
For technical questions, please call 1-800-444-3353.
SKU 68354
Maintenance and Servicing
Procedures not specifically explained
in this manual must be performed
only by a qualified technician.
Checking Reception
1. If the temperature data is not sent three minutes
after setup, please check the following:
a. The Weather Station and Transmitter are at
least 1.5 to 2 yards away from any sources of
interference, such as computer monitors or TV sets.
b. The Transmitter has not been placed on
or close to a metal window frame.
c. Electrical products such as headphones or
speakers should not be operating on the same
signal (433 MHz) as the Weather Station. And.
2. Make sure that your neighbors are not using any
electrical devices operating on a similar frequency.
Cleaning, Maintenance,
and Lubrication
1.
BEFORE EACH USE,
inspect the general condition
of the tool. Check for loose hardware, misalignment
or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other
condition that may affect its safe operation.
2.
AFTER USE,
wipe external surfaces with clean cloth.
Do not immerse in water.
3. Do not use cleaning agents to clean the plastic parts of
the tool. Use only a mild detergent or a damp cloth.
