SKU 92793
For technical questions please call 1-800-444-3353. Page 2
T
HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:
Model______________
Serial No._____________
Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Material:
Wrought iron hanging stand and all brass candle lantern.
Finish:
Flat black powder coat
Candle Size:
1-1/2” diameter (not included)
Overall Size:
6-7/8” Hex x 12-1/4” Height.
Weight:
1.25 Lbs.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.
Keep work area clean. Cluttered areas invite injury.
2.
Observe work area conditions. Keep work area well lit.
3. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately. Do not use this product if any switch
does not turn on and off properly.
4.
Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
5.
Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.
6.
Keep children and pets away. Children must never be allowed to play with the Wall Lantern.
Only locate this product in an area that is out of reach of children and pets.
7.
Store idle equipment. When not in use always lock up the Candle Wall Lantern and keep it out
of the reach of children.
8.
Dress properly. Wear restrictive hair covering to contain long hair.
9.
Use eye protection. Always wear ANSI approved impact safety goggles when setting up this
product.
10. Maintain products with care. Keep the glass clean for better and safer performance.
11. Do not overreach. Keep proper footing and balance at all times.
