background image

SKU 95690-95692               For technical questions, please call 1-800-444-3353. 

PAGE 3

2.

 

Keep bystanders, children, and visitors away while operating the Sprayer.    

 

Distractions can cause you to lose control.

PERSONAL SAFETY

3. 

Stay alert.  Watch what you are doing, and use common sense when operating 
a power tool.  Do not use the Sprayer while tired or under the influence of drugs, 
alcohol, or medication.  A moment of inattention while operating power tools may 
result in serious personal injury.

4. 

Dress properly.  Do not wear loose clothing or jewelry.  Contain long hair.  Keep 
your hair, clothing, and gloves away from moving parts.  Loose clothes, jewelry, or 
long hair can be caught in moving parts.

5. 

Do not overreach.  Keep proper footing and balance at all times.  Proper footing 
and balance enables better control of the Sprayer in unexpected situations.

6. 

Always wear eye, breathing, and skin protection.  Wear ANSI-approved safety 
impact goggles, an ANSI approved respirator, latex gloves, and proper safety 
clothing when using this product.

 

TOOL USE AND CARE

7. 

Do not force the Sprayer.  Use the correct product for your application.   

 

 

The correct product will do the job better and safer at the rate for which it is  

 

 

designed.

8. 

Store idle tools and equipment out of reach of children and other untrained   

 

people.  Tools and equipment are dangerous in the hands of untrained users.

 

 

 

9. 

Maintain the Sprayer with care.  Keep this product clean.  A properly  

 

 

 

maintained tool is easier to control.  Do not use damaged tools and  equipment.     

 

Tag damaged tools and equipment “Do not use” until repaired.

10.

 

Check for misalignment or binding of moving parts, loose or broken 

 

parts,  and any other condition that may affect the Sprayer’s operation.  If    

 

damaged, have the Sprayer serviced before using.  Many accidents are  

 

 

caused by poorly maintained tools and equipment.

Summary of Contents for ONE STOP GARDENS 95690











Reviews: