Page 2
SKU 92122
For technical questions, please call 1-800-444-3353.
SaVe thiS Manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual near
the assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and dry
place for future reference.
general Safety rules
Warning! read all instructions
Failure to follow all instructions
listed below may result in injury.
SaVe theSe inStructionS
Work area safety
1.
Keep work area clean and well
a.
lit.
Cluttered or dark areas invite
accidents.
Keep children and bystanders
b.
away while servicing the lights.
Distractions can cause you to
lose control.
personal safety
2.
Stay alert, watch what you are
a.
doing and use common sense
when installing the Lights. Do not
install while you are tired or under
the influence of drugs, alcohol or
medication.
use safety equipment. always
b.
wear eye protection.
Safety
equipment such as dust mask and
work gloves used for appropriate
conditions will reduce personal
injuries.
light use and care
3.
Do not use the Light if the switch
a.
does not turn it on and off.
Any
product that cannot be controlled
with the switch is dangerous and
must be repaired.
disconnect the battery before
b.
storing the lights.
Maintain the Lights. Check for
c.
misalignment or breakage of parts
and any other condition that may
affect operation. If damaged, have
the Light repaired before use.
Service
5.
Have your Lights serviced by a
a.
qualified repair person using only
identical replacement parts.
Specific Safety Rules
Maintain labels and nameplates on
1.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
This product is not a toy. Keep it out
2.
of reach of children.
Dispose of batteries in a manner
3.
appropriate to their type according
to State, Local and Federal laws and
regulations.
The warnings, precautions,
4.
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SaVe theSe
inStructionS.
