Card Type:
1.
ISO18000-6B
：
Only read ISO18000-6B protocol tag.
；
2.
EPC
（
GEN 2
）
Single
– Tag
：
Only read EPC
（
GEN 2
）
protocol tag, read one tag
one time. Reader hard to or not read multiple tags when put them in the effective range.
3.
EPC
（
GEN 2
）
Multi
– Tag
：
Only reader EPC
（
GEN 2
）
protocol tag, multi-tag
can be read.
4.
EPC
（
GEN2
）
Multi
–Data
：
Only read EPC
（
GEN 2
）
protocol tag,except read
default EPC area 12 bytes data, other area data can be read. (Select this type and set to
read the length of other area data in senior parameter, the max. Is 12 bytes)
5.
ISO18000-6B + EPC
（
GEN 2
）
: ISO18000-6B and EPC
（
GEN 2
）
protocol tag
can be read.
Freq Parameters Input Zone It refer to 18000-6b and EPC card, normally hopping need be
selected.
6.2.3 Freq Parameters Input Zone:
It refer to 18000-6b and EPC card, normally hopping need be selected.
6.2.4 Senior Parameter Input Zone:
It is used for multiple channel reader (split reader), integrative reader default is antenna
6.2.5 Active Encrypt Function
For this version software, the encrypt function is hided, to enable the encrypt function,
please see below procedure.
1)
Press”F8” 5 Times
