Service Manual version 1008
OP 1200/1500/1700 (PC920 Intel 945G)
8-113
A-2: OP 1500 LCD
The standard display used for the OP 1500 is either an LG.Phillips
LM150X08-TL03
or an AUO
M150XN07
or its equivalent.
LM150X08-TL03
is a color active matrix liquid crystal display with an
integral cold cathode fluorescent lamp (CCFL) backlight system. The matrix employs a-Si thin film
transistor as the active element.
A-2-1: 15” LG.Phillips LM150X08-TL03
It is a transmissive type display operating in the normally white mode. It has a 15” diagonally
measured active display area with XGA resolution (768 vertical by 1024 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the brightness of the sub-pixel color is determined with an 8-bit gray scale signal for
each dot, thus, presenting a palette of more than 16M colors. It has been designed to apply the 8-bit
1 port LVDS interface.
A-2-1-1. Specification
Item
Specification
Active Screen Size
15.0 inches (38.016cm) diagonal (Aspect ratio 4:3)
Outline Dimension
326.5(H) x 253.5 (V) x 11.2(D) mm (Typ.)
Pixel Pitch
0.297 mm x 0.297 mm
Pixel Format
1024 horiz. By 768 vert. Pixels RGB strip arrangement
Color Depth
16M colors ( 6-bit with FRC )
Luminance, White
250 cd/m2 (Center 1 points Typ.)
Viewing Angle (CR>10) R/L 130 (Typ.), U/D 100 (Typ)
Power Consumption
Total 10.12 Watt (Typ.) (1.16 Watt@VLCD, 8.96
Watt@250cd/[Lamp=8mA])
Weight
1,000 g (Typ.)
Display Operating Mode Transmissive mode, normally white
Surface Treatment
Hard coating(3H) & Anti-glare (Haze 13%) treatment of the front polarizer
A-2-1-2. Absolute Maximum Ratings of Environment
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Parameter
Symbol
Values
Units
Notes
Min
Max
Power Input Voltage
VLCD
-0.3
+3.6
Vdc
at 25
2
°
C
Operating Temperature
TOP
0
50
°
C
1
Storage Temperature
TST
-20
60
°
C
1
Operating Ambient Humidity
HOP
10
90
%RH
1
Storage Humidity
HST
10
90
%RH
1
A-2-1-3. Electrical Characteristics
Parameter
Symbol
Value
Unit
Notes
Min
Typ
Max
Power Supply Input Voltage
VLCD
3.15
3.3
3.45
Vdc
Power Supply Input Current
ILCD
-
350
400
mA
1
Power Consumption
PLCD
-
1.16
1.60
Watt
1
Rush current
IRUSH
-
-
2.0
A
3
1.
The specified current and power consumption are under the VLCD=3.3V, 25
2
°
C, fV=60Hz
condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency.
2.
The current is specified at the maximum current pattern.
3.
The duration of rush current is about 2ms and rising time of power Input is 1ms (min.).
Summary of Contents for OP 1200
