Safety Information
4
ONEAC CDR45I Series Power Conditioner, Installation Guide, 913-521 Rev. A
• Before the system is switched on, all protective ground terminals, extension
cords, auto-transformers and devices connected to it should be connected to
protective ground via a ground socket. Any interruption of the protective
ground connection will cause a potential shock hazard that could result in
serious personal injury.
• Make sure that only fuses with the required rated current and of the specified
type (normal blow, time delay, etc.) are used for replacement. The use of
repaired fuses and short-circuiting of fuse holders must be avoided.
• Adjustments described in this manual by a qualified technician are done with
power supplied to the system while protective covers are removed. Energy
available at many points may, if contacted, result in personal injury.
• Any adjustment, maintenance, or repair of the opened system under voltage
should be avoided as much as possible, and when inevitable, should be
carried out only by a skilled person who is aware of the hazard involved. Do
not attempt internal service or adjustment unless another person capable of
rendering first aid and resuscitation is present. Do not replace components
with the power cable connected.
• Do not operate the system in the presence of flammable gases or fumes.
Operation of any electrical system in such an environment constitutes a
definite safety hazard.
• Do not install substitute parts or perform any unauthorized modification to
the system.
• Capacitors inside the system may still be energized even if the system has
been disconnected from its power source.
Safety Symbols
The apparatus will be marked with the following symbol when it is necessary
for the user to
Refer to the Manual
in order to protect the apparatus from
damage:
This symbol is used to mark
Protective Earth Terminals
:
!
Summary of Contents for CDR45I Series
Page 6: ...Safety Information 6 ONEAC CDR45I Series Power Conditioner Installation Guide 913 521 Rev A...
Page 10: ...List of Figures 10 ONEAC CDR45I Series Power Conditioner Installation Guide 913 521 Rev...
Page 40: ...Physical Views 40 ONEAC CDR45I Series Power Conditioner Installation Guide 913 521 Rev A...
