1645
Chapter 1
User manual
Introducing the 1645
9
SNMP
You can manage the 1645 through SNMP using any SNMP browser. The 1645
supports MIB2 and a private MIB, including traps.
The private MIB files come with your copy of TMA. After installation of the TMA
data files, the private MIB files are available in directory C:\Program
Files\TMA\snmp
1
.
The “old” MIB files, from before the SNMPv2 era, can be recognised by the follow-
ing format: <filename>.mib
2
.
The “new” MIB files can be recognised by the following format:
<filename>_smiv2.mib
Refer to the TDRE book for more information on MIB ‘s and SNMP; also refer to
the SNMP configuration attributes in the TDRE book and the documentation of
your SNMP browser for more information.
Easy Configura-
tor
The Easy Configurator allows you to add HTML pages on top of the standard Web
Interface by adding a set of specific files on the file system of the 1645. These files
can be made either by OneAccess or by the customer itself.
The goal is to offer a simple, custom made web interface which allows only to
change or show those parameters that are relevant for a certain application or cus-
tomer.
Refer to the Maintenance tools manual (
) for more information.
Note that the HTTP interfaces are not only available on port 80, but also on
port 8080. This allows connecting to the HTTP interfaces in case a NAT
service is defined on port 80.
1. The first part of the directory path may be different if you did not choose the default path during
the installation of the TMA data files.
2. The filename is product dependent. To determine which MIB file corresponds with which prod-
uct, refer to the
models.nms
file (located in
C:\Program Files\TMA\model
).
Maintenance or
management
tool
Description and reference
