9
Operation
Stromanschluss / Batteriebetrieb:
a)
Plug one end of a suitable 4.5V AC adapter (not included) into the DC IN jack, and then plug
the other end into an AC wall outlet.
b)
Slide the battery compartment door open and insert two AA batteries (not included) into
the battery compartment. Be sure to observe the proper polarity (the “+” and “-” signs) as
indicated on the battery compartment.
Achtung:
Do not mix a used battery with a new one or mix different types of batteries. When
inserting the batteries, incorrectly inserting even one with improper polarity will cause leakage.
Disc Playback
•
Be sure to reduce the volume before plugging in or unplugging the headphone/earphones.
•
Plug headphones/earphones into the phones jack
•
Press the OPEN button to open the CD door.
•
Hold the disc with the label side facing up and press it onto the spindle until it clicks into place.
•
Close the CD door and press PLAY/PAUSE. The CD begins to spin. Adjust the volume as desired.
•
Use PLAY/PAUSE, the SKIP buttons and stop to navigate through the disc.
•
This unit had automatically contains Anti Shock function. When you play the Audio- or
MP3-Discs, the ESP symbol will appear on the display.
•
The tracks on the disc can be programmed to play in any order (up to 20 tracks)
•
Press the PROG button while in stop mode. “PRG”, track number “01”, and program number”P-00”
are shown in the display.
•
Use the SKIP buttons to select the first track to be programmed.
•
Press PROG button, so the first track number is now stored into memory which indicate as “P-01”.
•
Repeat steps 2 and 3 to program additional tracks.
•
After programming is finished, press the Play/Pause button, and program play begins from
the first programmed track. The player stops automatically after all programmed tracks
have been played.
•
Repeat function: Press MODE repeatedly, to select from the repeat modes REPEAT 1 (cur
-
rent track will be repeated), REPEAT (current folder will be repeated) and REPEAT ALL (all
contained tracks will be repeated).
