21
2
Dust Deputy® Owner’s Manual © 2010
Dust Deputy® Owner’s Manual © 2010
I. System Start-Up Information
Read the installation and maintenance instructions as well as the recom-
mended safety practices in this manual and your shop vacuum’s owner’s
manual before assembling and using the Dust Deputy®.
Some dusts are highly flammable or explosive. Learn / know
what you are dealing with. Follow all local, state, federal &
NFPA codes and guide lines.
Safety Instructions to be Strictly Followed.
Wood dust mixtures are highly flammable and can be explosive.
NEVER
introduce sparks or sources of ignition into collector.
1.) Dump drum after each use.
2.) Ground system. (See pg. 9) For added safety.
The Dust Deputy® is made from static dissipating plastic. Additional grounding is
recommended for increased safety. See grounding instructions.
Keep fire extinguishers handy at all times.
Can be used for collecting non-flammable liquids.
Dispose of waste in a
FIRE SAFE AREA.
NEVER leave wood dust in a building or vehicle.
Always read your shop vacuum owner’s manual for safety procedures
regarding the operation of your shop vacuum.
Do not vacuum, or use this Dust Deputy® near flammable or combustible
liquids, gases, or explosive dusts, such as gasoline or other fuels, lighter fluid,
cleaners, oil-based paints, natural gas, hydrogen, coal dust, magnesium dust,
grain dust, aluminum dust, sugar dust, flour dust or gun powder.
Do not vacuum anything that is burning or smoking, such as cigarettes, matches,
or hot ashes.
To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic
materials unless a HEPA filter is used. Do not use or store near hazardous
materials.
WARNING / SAFETY
Order Online at www.oneida-air.com
XIII. Accessories
AXS000000
AXS000001
UltraClean Scraper™
Extra Tungston Carbide Blade Set
Part #
Description
UltraClean Scraper™
AXD300000
AXD200000
AXD100000
VSHNZZ150
AKD000000
AXD200072
VSHRFE200
1.5” Hose / Cuffs 1.5” x 1.5”
1.25” Hose / Cuffs 1.25” &1.5”
1” Hose / Cuffs 1” & 1.5”
Coupler 1.5”
Hose Adaptor Kit
Hose 2” x 6’ w/ SD Cuffs
Hose 2” x 25’ w/ SD Cuffs
Part #
Description
Hose Packages (10ft. Lengths) & Options
HEPA Filter Retrofit Kit for
Single Stage Collectors.
All hose is high quality, static dissipating, wire reinforced.
Collector Not Included.
Hoses have at least one
1.5” dia. cuff to attach to
cyclone inlet.
Hollow handle scraper attaches
by hose to vacuum source and
sucks debris through handle
to container. Eliminates mess
from scraping that usually falls
to floor.
The Adaptor Kit
makes it possible
to attach 1.5” and
1.25” hoses to the
2” inlet.
See our complete line of ready-to-ship ductwork.
FREE shipping on ductwork orders of $300+
/ 48 States / Some Restrictions Apply
FXK011820
HEPA Filter Retrofit Kit
Part #
Description
Keep your shop clean
by preventing ultra-fine
dust from blowing out of
your single-stage bag
collector and into your
shop air.
Add a best-in-filtration
GE H12 HEPA filter
to your current single
stage dust collector.
(Cont.)
