The Original
Deluxe Dust Deputy Owner’s Manual
with 10 Gal. Steel Drum
AXD000010
Made in the USA
ZBM000036DEL10 / 1-2014
1.800.732.4065 www.oneida-air.com
Vacuum
Not
Included
Fire Hazards and Codes
Warning! Explosion and fire hazard! Never vacuum flammable fluids or gas, oil, alcohol, solvents, etc. Do not
operate near flammable fluids or gas. Never vacuum warm fluids or materials at more than 140 deg. F (60 deg.
C), such as burning cigarettes, ashes, glowing coals, etc.
Warning! Do not vacuum hazardous / carcinogenic dust unless a HEPA filter is installed.
Always keep filter cartridge clean so the vacuum operates properly.
Empty Dust Deputy waste can frequently. Never leave flammable material in your Dust Deputy or shop vacuum.
Oneida Air Systems makes every effort to accurately represent our products and prices, however OAS
reserves the right to make changes to products and prices at any time. As a manufacturer, OAS reserves
the right to change product specifications at any time in an effort to achieve better quality products.
Returned Goods Policy
Buyer must inform O.A.S. of any shortage or damage, by so noting in writing, on the freight delivery bill prior
to signing to indicate receipt of shipment. All claims, including claims covered under the limited warranty, are
subject to inspection and investigation by O.A.S. O.A.S. reserves the right to inspect, investigate all returned
products before Buyer’s claim is settled. All products returned for a cash refund must be unused, resaleable and
purchased within 30 days. There are no refunds on flex hose, custom made components or partial kit items. Kits
must be returned in full (all components) for credit.
There will be a 25% restocking fee applied to any returned
items. Buyer must call and get an RMA (Return Authorization Number). Merchandise must be shipped
to us prepaid.
Limited Warranty
Terms & Conditions
Oneida Air Systems™ warrants the products manufactured by Oneida Air Systems, for a period of 90 days or
more depending on the product, to the original purchaser from the date of purchase unless otherwise specified.
Purchaser is responsible for returning warranty items to OAS at their expense. All parts must be returned with
an OAS provided Returned Material Authorization Number (RMA#). Any shipment without an RMA will be
refused. Items not manufactured by Oneida Air Systems are limited to their own manufacturer’s warranties. All
electrical items such as magnetic starters, remotes, sensors, pumps and accessories are limited to 90 days.
Oneida Air Systems warrantees that the product will be free from defects in materials and workmanship. This
warranty does not apply to defects due directly or indirectly to misuse, negligence, accidents, abuse, repairs,
alterations, improper wiring or lack of maintenance. This is Oneida Air Systems sole written warranty and
any and all warranties that may be implied by law, including any merchantability or fitness, for any particular
purpose, are hereby limited to the duration of this written warranty. Oneida Air Systems does not warrant or
represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so
warrants. In no event shall Oneida Air Systems’ liability under this warranty exceed the purchase price paid for
the product and any legal actions brought against Oneida Air Systems shall be tried in the State of New York,
County of Onondaga.
ONEIDA AIR SYSTEMS SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR
PROPERTY OR FOR INCIDENTAL, AND CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES
ARISING FROM THE USE OF OUR PRODUCT.
Before Purchasing or Installing a dust collection system the buyer is cautioned to do so in accordance with
prescribed Federal, State, Local, OSHA, NFPA, and any other applicable codes or regulations relating to the
type of dust(s) you are collecting.
SOME TYPES OF DUST UNDER CERTAIN CONDITIONS HAVE THE POTENTIAL TO BE EXPLOSIVE.
Oneida Air Systems is not responsible for how the dust collector is used or installed. Dusts with deflagration or
explosion risks, such as wood dust, may require additional safety equipment including but not limited to; vent-
ing, spark detection, suppression systems, back draft dampers or may require installation in an outside location
or in a protected area away from personnel. The customer assumes the responsibility for contacting their insur-
ance underwriter with regard to specific engineering controls or application requirements. (We suggest you
reference NFPA 664, 654 and 68 codes for more information) Oneida Air Dust Collection Systems may not be
suitable for some applications and are not designed to be used in explosive atmospheres.
Oneida Air Systems
equipment should only be installed and wired by a licensed electrician following all applicable local and
national electrical codes.
US patent # US 7, 282, 074 B1
#7,282,074 C1
Dust Deputy design TM
US trademark Reg. No. 4,599, 918
